// #define EXTRUDER_AUTO_FAN_SPEED 255   // 255 == full speed
#define EXTRUDER_AUTO_FAN_SPEED 64   // 255 == full speed


// #define BABYSTEPPING
#define BABYSTEPPING

//  #if AXIS_IS_TMC(X)
//    #define X_CURRENT     800  // (mA) RMS current. Multiply by 1.414 for peak current.
  #if AXIS_IS_TMC(X)
    #define X_CURRENT     600  // (mA) RMS current. Multiply by 1.414 for peak current.

 // #if AXIS_IS_TMC(Y)
 //   #define Y_CURRENT     800
  #if AXIS_IS_TMC(Y)
    #define Y_CURRENT     600

//  #if AXIS_IS_TMC(Z)
//    #define Z_CURRENT     800
  #if AXIS_IS_TMC(Z)
    #define Z_CURRENT     600

//  #if AXIS_IS_TMC(E0)
//    #define E0_CURRENT    800
  #if AXIS_IS_TMC(E0)
    #define E0_CURRENT    600

//  #define STEALTHCHOP_XY
//  #define STEALTHCHOP_Z
//  #define STEALTHCHOP_E
  #define STEALTHCHOP_XY
  #define STEALTHCHOP_Z
  #define STEALTHCHOP_E

//   #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
  #define CHOPPER_TIMING CHOPPER_DEFAULT_24V

//  #define X_HYBRID_THRESHOLD     100  // [mm/s]
  #define X_HYBRID_THRESHOLD     150  // [mm/s]

//  #define Y_HYBRID_THRESHOLD     100
  #define Y_HYBRID_THRESHOLD     150

// #define TMC_DEBUG
  #define TMC_DEBUG