====== 3Dプリンタ自作中に使う画像 ======

{{imgpaste:202510:htmikan-20251018-203411.png?500}}
{{imgpaste:202510:htmikan-20251018-203446.png?500}}

===== Duet 2 Wifi =====
{{imgpaste:202510:htmikan-20251018-203528.png?500}}

===== Bigtreetech Skr 1.3 =====
[[https://github.com/bigtreetech/BIGTREETECH-SKR-V1.3|GitHub - bigtreetech/BIGTREETECH-SKR-V1.3: 32bit board with LPC1768, support marlin2.0 and smoothieware, support lcd2004/12864, On-board TMC2130 SPI interface and TMC2208 UART interface no additional wiring is required]]	
{{imgpaste:202510:htmikan-20251018-203652.png?500}}
{{imgpaste:202510:htmikan-20251018-203703.png?500}}
{{imgpaste:202510:htmikan-20251018-203712.png?500}}

===== MKS Base =====
{{imgpaste:202510:htmikan-20251018-203729.png?500}}
{{imgpaste:202510:htmikan-20251018-203737.png?500}}
{{imgpaste:202510:htmikan-20251018-203745.png?500}}
{{imgpaste:202510:htmikan-20251018-203756.png?500}}

===== MKS GEN 1.4 =====
{{imgpaste:202510:htmikan-20251018-203828.png?500}}
{{imgpaste:202510:htmikan-20251018-203836.png?500}}

===== MKS GEN L 1.0 =====
{{imgpaste:202510:htmikan-20251018-203857.png?500}}

===== MKS TFT =====
{{imgpaste:202510:htmikan-20251018-203911.png?500}}
{{imgpaste:202510:htmikan-20251018-203919.png?500}}
{{imgpaste:202510:htmikan-20251018-203926.png?500}}